[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.6.23-cubis-00132-g65a36ad4883e (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Thu Mar 28 16:04:47 UTC 2024
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: MSC nanoRISC i.MX6Q
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 320 MiB at 0x3c000000 on node -1
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000010000000-0x000000004fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000010000000-0x000000004fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
[    0.000000] percpu: Embedded 16 pages/cpu s35988 r8192 d21356 u65536
[    0.000000] pcpu-alloc: s35988 r8192 d21356 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Kernel command line:  bootchooser.active=system console=ttymxc2,115200n8  root=/dev/mmcblk2p2 rootwait ro
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260096
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 694328K/1048576K available (10240K kernel code, 1639K rwdata, 2572K rodata, 1024K init, 529K bss, 26568K reserved, 327680K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C-310 errata 752271 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] ccm: possible glitch: ldb_di0_sel already changed from reset value: 0
[    0.000000] ccm: possible glitch: ldb_di1_sel already changed from reset value: 0
[    0.000000] Switching to timer-based delay loop, resolution 333ns
[    0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[    0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[    0.001513] Console: colour dummy device 80x30
[    0.001547] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[    0.001563] CPU: Testing write buffer coherency: ok
[    0.001598] CPU0: Spectre v2: using BPIALL workaround
[    0.001607] pid_max: default: 32768 minimum: 301
[    0.001783] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001807] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002631] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003979] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.004174] Setting up static identity map for 0x10100000 - 0x10100060
[    0.004391] rcu: Hierarchical SRCU implementation.
[    0.004398] rcu: 	Max phase no-delay instances is 1000.
[    0.005408] smp: Bringing up secondary CPUs ...
[    0.006319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.006338] CPU1: Spectre v2: using BPIALL workaround
[    0.006499] smp: Brought up 1 node, 2 CPUs
[    0.006512] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[    0.006522] CPU: All CPU(s) started in SVC mode.
[    0.007519] devtmpfs: initialized
[    0.018277] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.018536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018561] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.034381] pinctrl core: initialized pinctrl subsystem
[    0.035918] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.039298] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.040483] thermal_sys: Registered thermal governor 'step_wise'
[    0.040554] cpuidle: using governor menu
[    0.040703] CPU identified as i.MX6Q, silicon rev 1.5
[    0.050533] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000
[    0.060142] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000
[    0.060749] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000
[    0.060930] platform 20e0000.iomuxc-gpr:ipu2_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2800000
[    0.061197] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/hog/hoggrp-1
[    0.062534] platform 2184000.usb: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a0000/tusb320@60/connector
[    0.065960] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000
[    0.066061] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux
[    0.067039] platform 20e0000.iomuxc-gpr:ipu2_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2800000
[    0.067142] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux
[    0.073900] platform panel: Fixed dependency cycle(s) with /disp0
[    0.074008] platform 2400000.ipu: Fixed dependency cycle(s) with /disp0
[    0.074096] platform disp0: Fixed dependency cycle(s) with /panel
[    0.074176] platform disp0: Fixed dependency cycle(s) with /soc/ipu@2400000
[    0.075666] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.075680] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.076871] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
[    0.087998] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.090017] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.091774] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.093543] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.095307] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.097184] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.099031] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.104717] SCSI subsystem initialized
[    0.104986] usbcore: registered new interface driver usbfs
[    0.105026] usbcore: registered new interface driver hub
[    0.105071] usbcore: registered new device driver usb
[    0.105340] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
[    0.105362] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
[    0.105642] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
[    0.105661] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
[    0.107350] i2c i2c-0: using pinctrl states for GPIO recovery
[    0.108284] i2c i2c-0: IMX I2C adapter registered
[    0.109501] i2c i2c-1: using pinctrl states for GPIO recovery
[    0.109533] i2c i2c-1: IMX I2C adapter registered
[    0.109877] pps_core: LinuxPPS API ver. 1 registered
[    0.109885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.109908] PTP clock support registered
[    0.216864] platform 2184000.usb: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a0000/tusb320@60/connector
[    0.216982] typec port0: Fixed dependency cycle(s) with /soc/bus@2100000/usb@2184000
[    0.217759] Advanced Linux Sound Architecture Driver Initialized.
[    0.219370] vgaarb: loaded
[    0.219862] clocksource: Switched to clocksource mxc_timer1
[    0.226674] VFS: Disk quotas dquot_6.6.0
[    0.226742] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.226880] FS-Cache: Loaded
[    0.237716] NET: Registered PF_INET protocol family
[    0.238188] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.240095] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.240132] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.240149] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.240236] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.240534] TCP: Hash tables configured (established 8192 bind 8192)
[    0.240754] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.240804] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.241005] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.241664] RPC: Registered named UNIX socket transport module.
[    0.241674] RPC: Registered udp transport module.
[    0.241681] RPC: Registered tcp transport module.
[    0.241686] RPC: Registered tcp-with-tls transport module.
[    0.241690] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.241704] PCI: CLS 0 bytes, default 64
[    0.249999] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    0.252098] Initialise system trusted keyrings
[    0.252374] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    0.253119] NFS: Registering the id_resolver key type
[    0.253175] Key type id_resolver registered
[    0.253182] Key type id_legacy registered
[    0.253227] fuse: init (API version 7.39)
[    0.253668] Key type asymmetric registered
[    0.253679] Asymmetric key parser 'x509' registered
[    0.253728] io scheduler mq-deadline registered
[    0.253737] io scheduler kyber registered
[    0.253768] io scheduler bfq registered
[    0.260582] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware
[    0.262196] mxs-dma 110000.dma-controller: initialized
[    0.269631] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX
[    0.270804] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 269, base_baud = 5000000) is a IMX
[    0.271690] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX
[    0.271739] printk: console [ttymxc2] enabled
[    0.278810] panel-simple panel: supply power not found, using dummy regulator
[    0.279075] panel-simple panel: Specify missing connector_type
[    0.281086] imx-ipuv3 2400000.ipu: IPUv3H probed
[    0.282337] imx-ipuv3 2800000.ipu: IPUv3H probed
[    0.292320] brd: module loaded
[    0.299654] loop: module loaded
[    0.302392] ads7924 0-0048: probed ads7924 at i2c 0, address 48 with 2 channels
[    0.311811] at25@0 enforce active low on GPIO handle
[    0.312651] at25 spi0.0: 8 KByte at25 eeprom, pagesize 32
[    0.313215] spi@0 enforce active low on GPIO handle
[    0.315674] CAN device driver interface
[    0.318524] usbcore: registered new interface driver usblp
[    0.318571] usbcore: registered new interface driver usb-storage
[    0.318686] usbcore: registered new interface driver usbserial_generic
[    0.318726] usbserial: USB Serial support registered for generic
[    0.330079] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    0.330118] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    0.359895] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    0.360173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.360192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.360206] usb usb1: Product: EHCI Host Controller
[    0.360217] usb usb1: Manufacturer: Linux 6.6.23-cubis-00132-g65a36ad4883e ehci_hcd
[    0.360228] usb usb1: SerialNumber: ci_hdrc.1
[    0.360909] hub 1-0:1.0: USB hub found
[    0.360956] hub 1-0:1.0: 1 port detected
[    0.363202] edt_ft5x06 0-0038: supply vcc not found, using dummy regulator
[    0.363352] edt_ft5x06 0-0038: supply iovcc not found, using dummy regulator
[    0.363742] i2c_dev: i2c /dev entries driver
[    0.366600] da9063 3-0058: Device detected (chip-ID: 0x61, var-ID: 0x63)
[    0.395466] da9063-rtc da9063-rtc: DMA mask not set
[    0.395766] bpro: mapping for mode 2 not defined
[    0.417775] bcore2: Bringing 1380000uV into 1420000-1420000uV
[    0.434670] bpro: Bringing 1500000uV into 1360000-1360000uV
[    0.438777] da9063-rtc da9063-rtc: registered as rtc0
[    0.443284] da9063-rtc da9063-rtc: setting system clock to 2000-01-01T00:00:03 UTC (946684803)
[    0.444154] at24 3-0054: supply vcc not found, using dummy regulator
[    0.445358] at24 3-0054: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    0.445450] i2c i2c-1: Added multiplexed i2c bus 3
[    0.446030] i2c i2c-1: Added multiplexed i2c bus 4
[    0.446099] i2c-mux-gpio i2cmux: 2 port mux on 21a4000.i2c adapter
[    0.449531] da9063-watchdog da9063-watchdog: DMA mask not set
[    0.451900] sdhci: Secure Digital Host Controller Interface driver
[    0.451912] sdhci: Copyright(c) Pierre Ossman
[    0.451919] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.454105] hid: raw HID events driver (C) Jiri Kosina
[    0.454414] usbcore: registered new interface driver usbhid
[    0.454425] usbhid: USB HID core driver
[    0.456140] gpio-mux mux-controller: 2-way mux-controller registered
[    0.456554] bmem: Bringing 1500000uV into 1360000-1360000uV
[    0.457390] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO
[    0.457444] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO
[    0.463321] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[    0.469109] bio: Bringing 1800000uV into 1280000-1280000uV
[    0.470260] NET: Registered PF_INET6 protocol family
[    0.471639] Segment Routing with IPv6
[    0.471744] In-situ OAM (IOAM) with IPv6
[    0.471863] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.472704] NET: Registered PF_PACKET protocol family
[    0.472720] can: controller area network core
[    0.472789] NET: Registered PF_CAN protocol family
[    0.472802] can: raw protocol
[    0.472814] can: broadcast manager protocol
[    0.472831] can: netlink gateway - max_hops=1
[    0.472977] Key type dns_resolver registered
[    0.473746] Registering SWP/SWPB emulation handler
[    0.484096] Loading compiled-in X.509 certificates
[    0.490041] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
[    0.490497] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
[    0.491341] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA
[    0.526054] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.530063] mmc0: new high speed SDHC card at address aaaa
[    0.533017] mmcblk0: mmc0:aaaa SA08G 7.40 GiB
[    0.536908]  mmcblk0: p1
[    0.549884] mmc2: new DDR MMC card at address 0001
[    0.551057] mmcblk2: mmc2:0001 SEM04G 3.69 GiB
[    0.554007]  mmcblk2: p1 p2 p3 p4
[    0.555777] mmcblk2boot0: mmc2:0001 SEM04G 2.00 MiB
[    0.558652] mmcblk2boot1: mmc2:0001 SEM04G 2.00 MiB
[    0.561184] mmcblk2rpmb: mmc2:0001 SEM04G 2.00 MiB, chardev (246:0)
[    0.676623] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0x80b4a874)
[    0.676777] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0x80b4a874)
[    0.676943] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops 0x80b4a874)
[    0.677101] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops 0x80b4a874)
[    0.677165] imx-drm display-subsystem: bound disp0 (ops 0x80b4ab2c)
[    0.677735] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0
[    0.694018] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device
[    0.696104] spi-nor spi5.0: m25p16 (2048 Kbytes)
[    0.696225] 4 fixed-partitions partitions found on MTD device spi5.0
[    0.696242] Creating 4 MTD partitions on "spi5.0":
[    0.696254] 0x000000000000-0x000000090000 : "boot"
[    0.698155] 0x000000090000-0x0000000c0000 : "boot-env"
[    0.699932] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[    0.700196] 0x0000000c0000-0x000000100000 : "settings"
[    0.702099] 0x000000100000-0x000000200000 : "audit-trail"
[    0.704504] input: EP0700MLY2M as /devices/platform/soc/2100000.bus/21a0000.i2c/i2c-0/0-0038/input/input0
[    0.705132] at25 spi5.1: 8 KByte at25 eeprom, pagesize 32
[    0.705226] spi_master spi5: /soc/bus@2000000/spba-bus@2000000/spi@2014000/spi@0/partitions has no valid 'reg' property (-22)
[    0.716641] spi_master spi5: Failed to create SPI device for /soc/bus@2000000/spba-bus@2000000/spi@2014000/spi@0/partitions
[    0.717969] pps pps0: new PPS source ptp0
[    0.724123] fec 2188000.ethernet eth0: registered PHC device 0
[    0.741437] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
[    0.881889] clk: Disabling unused clocks
[    0.882299] ALSA device list:
[    0.882310]   #0: imx-ssm2518
[    0.889520] EXT4-fs (mmcblk2p2): mounted filesystem 0b8c10ee-7d29-425d-a708-959635dcce00 ro without journal. Quota mode: none.
[    0.889590] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
[    0.890082] devtmpfs: mounted
[    0.892547] Freeing unused kernel image (initmem) memory: 1024K
[    0.892935] Run /sbin/init as init process
[    0.892950]   with arguments:
[    0.892960]     /sbin/init
[    0.892969]   with environment:
[    0.892975]     HOME=/
[    0.892982]     TERM=linux
[    0.900430] usb 1-1: New USB device found, idVendor=045b, idProduct=022b, bcdDevice= 1.00
[    0.900478] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.901733] hub 1-1:1.0: USB hub found
[    0.901917] hub 1-1:1.0: 2 ports detected
[    1.220481] usb 1-1.2: new full-speed USB device number 3 using ci_hdrc
[    1.380682] usb 1-1.2: New USB device found, idVendor=0451, idProduct=2046, bcdDevice= 1.25
[    1.380717] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.388495] hub 1-1.2:1.0: USB hub found
[    1.388673] hub 1-1.2:1.0: 4 ports detected
[    1.445830] EXT4-fs (mmcblk2p3): mounted filesystem f224eed2-3e06-de55-a0b9-3c6d516ad275 ro without journal. Quota mode: none.
[    1.676238] EXT4-fs (mmcblk2p4): recovery complete
[    1.677037] EXT4-fs (mmcblk2p4): mounted filesystem a8d65a64-7af9-4173-8d99-4d859258dcc5 r/w with ordered data mode. Quota mode: none.
[    1.709937] usb 1-1.2.1: new full-speed USB device number 4 using ci_hdrc
[    1.790674] EXT4-fs (mmcblk0p1): recovery complete
[    1.791665] EXT4-fs (mmcblk0p1): mounted filesystem 086ec959-b735-4346-b136-4bf66631c727 r/w with ordered data mode. Quota mode: none.
[    1.869932] usb 1-1.2.1: not running at top speed; connect to a high speed hub
[    1.871178] usb 1-1.2.1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[    1.871206] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.871220] usb 1-1.2.1: Product: 802.11n NIC
[    1.871231] usb 1-1.2.1: Manufacturer: Realtek
[    1.871241] usb 1-1.2.1: SerialNumber: 00E04C0001
[    1.931156] udevd[143]: starting version 3.2.14
[    6.099900] random: crng init done
[    6.131266] udevd[144]: starting eudev-3.2.14
[    6.699078] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.745624] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.747937] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    7.102295] usb 1-1.2.1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[    7.102328] usb 1-1.2.1: RTL8188EU MAC: d0:37:45:0c:90:84
[    7.102342] usb 1-1.2.1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
[    7.107845] usb 1-1.2.1: Firmware revision 28.0 (signature 0x88e1)
[    7.783203] usbcore: registered new interface driver rtl8xxxu
[    7.870159] EXT4-fs (mmcblk2p2): re-mounted 0b8c10ee-7d29-425d-a708-959635dcce00 ro. Quota mode: none.
[    8.062963] overlayfs: failed to set xattr on upper
[    8.062980] overlayfs: ...falling back to redirect_dir=nofollow.
[    8.062986] overlayfs: ...falling back to uuid=null.
